Recent content by 1aespinoza

I would tend to blame the amp more than tbe sub if all wiring checks out. Skar is known to be on the finicky side when abused (not enough power coming in). Another test to exculpate anything upstream of the amp is to connect your phone straight to the amp with a 3.5mm to RCA patch cable. Test...

This is a feature that uses passive crossover components. On the full ranges you use bass blocking capacitors, and high frequency blocking inductor coils on the sub. It is just like using 2 or 3 way components with a passive crossover network. You still have to follow the Ohms specifications. 2...

If you have a multimeter, check the resistance of the sub (Ohms). Also make sure the fuse by the battery is snug. Refresh the ground connection as well.

So where the wire enters the cabin it is not chaffed or pinched? Has it happened more than once? What is the fuse rating and the amp's combined fuse rating.

Yes.

Actually the sub and amp are compatible. It says the channels are 2 Ohms capable, so the bridged channels are 4 Ohms. Bridge the rears to the Sub and use the fronts for full range.

L & R signal guarantees you will not miss any program material in stereo recordings, which is the norm nowadays. It is also Double the Voltage as compared to using only one side. Passive LOCs work best with amplified signals, exempli gratia after the amp or radio speaker outputs. Since you...

In that case, the Alpine subs that AnthonyO is selling are another great option. They are the Alpine S2-W10D4. The recommended sealed box per sub is 0.4-0.85 cubic feet. So with a sealed box of 1 to 1.5 cubic feet you can mount both subs in it. Being that you have an SUV, the bass will be...

I think I recommended these to you already, but if not, Bazooka BT1024DVC or BT8024DVC. They are subs in a tube that have a high sensitivity and excellent playback. They are not heavy and can be easily removed when need be.

Not at all. Only the speaker's sensitivity is what counts in the front stage. 90dB and above is a good target.

Where are you getting the power for the remote turn on on the sub amp?

That C4 looks mighty nice. Reminds me of the Stereo Integrity SIQ amps.