FS: Mpyre 65M mids/crossovers

  • 6
    Participant count
  • Participant list

bergend2
10+ year member

CarAudio.com Elite
811
0
Milwaukee
Item(s) for Sale:

Pair of Mpyre 65M midrange speakers, and crossovers (not in picture, but included)

Item(s) Description/Condition:

Used, but in good shape. Just picked these up recently, and was going to use them in my Jetta, however it was more work than I was looking to do to mount them in my doors, as they are slightly larger than a normal 6.5" speaker, they are ~7". So I am sticking with my ID OEMs instead. The only problem is that one of the tabs on the speakers is partially broken off, check out the picture.

Mpyre 65m specs:

Fs: 25.7 Hz

Qms: 6.2

Qes: 0.46

Qts: 0.42

Vas: 11.7 liters

Re: 3.25 Ohms

Le: .214 mH

BL: 9.7 N/A

Mms: 76.7 grams

Sd: 130 cm^2

Cms: 0.5 mm/N

Xmax: 14mm 1 WAY LINEAR

Xmech: 18mm 1 WAY MAX

Depth: 3 5/8"

PWR Handling: 150WRMS

Single 4 Ohm Voice Coil

Price:

$90 shipped.

Shipping and Miscellaneous Item Information:

...

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

IMG_1522.jpg


IMG_1523.jpg


IMG_1524.jpg


IMG_1525.jpg


 
Trade for a set of Memphis MSync 6.5" components? I have them listed for $150. Would take a loss on them to test with these.

 
Trade for a set of Memphis MSync 6.5" components? I have them listed for $150. Would take a loss on them to test with these.
Thanks for the offer, but I don't have any use for more components right now.

 
Thanks for the offer, but I don't have any use for more components right now.
I thought you just said you were trying to put these in your doors? It's the same thing.. a midrange w/no tweeter. Just like these.

edit: My bad. I skimmed and didn't see your post about your ID OEMs.

 
I thought you just said you were trying to put these in your doors? It's the same thing.. a midrange w/no tweeter. Just like these.
edit: My bad. I skimmed and didn't see your post about your ID OEMs.
Yeah, sorry man. Got a few sets of OEMs, and a bunch of Eclipse comps around here as well. Those MSync's are nice though, I had the old ones with the CF cone and blue tweets, and like them a lot.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Hell of a deal, I think it may be the last day. If you're considering going to a 3 way, here's a great buy! You have to load them into your cart...
0
1K
I agree with DJ. Pro style speakers are designed for large ported enclosures and lack bottom end without an enclosure. Plus they tend to suffer...
8
1K
I think you need like a 10x switch on an amp? You would need to bandpass the mids or something Pioneer network mode or similar? I know the new...
3
1K
I have ran the 6.5’s, but not the tweeters. They were very smooth and had good low mid bass. They were perfectly happy being high passed at 75 hz...
1
880

About this thread

bergend2

10+ year member
CarAudio.com Elite
Thread starter
bergend2
Joined
Location
Milwaukee
Start date
Participants
Who Replied
Replies
9
Views
1,766
Last reply date
Last reply from
m3dia_lab
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top