I'm trying to gain a bit of trunk room, and increase sq a bit while I'm at it. I am considering building it to fit flush with the trunk pass-through opening, and have the sub behind the larger of the fold down seat-backs. That way I can always have that one down, and have a usable seat.
Different car, same seat/location^
Would that be a good idea? I can't seem to get winisd to agree with my crappy desktop. Even if I could, there's too much knowledge/experience around here not to ask.... What would be a good volume for a sealed enclosure. Vehicle is a 2005 Malibu.
Specs for the sub below, its the one in my sig.
* f(s)= 32.30 Hz
* R(e)= 0.83 Ohms
* Z(max)= 16.12 Ohms
* Q(ms)= 9.635
* Q(es)= 0.524
* Q(ts)= 0.497
* V(as)= 98.150 liters (3.466 cubic feet)
* L(e)= 1.62 mH
* n(0)= 0.60 %
* SPL= 89.89 1W/1m
* M(ms)= 342.70 grams
* C(ms)= 0.07 mm/N
* BL= 10.50
Different car, same seat/location^
Would that be a good idea? I can't seem to get winisd to agree with my crappy desktop. Even if I could, there's too much knowledge/experience around here not to ask.... What would be a good volume for a sealed enclosure. Vehicle is a 2005 Malibu.
Specs for the sub below, its the one in my sig.
* f(s)= 32.30 Hz
* R(e)= 0.83 Ohms
* Z(max)= 16.12 Ohms
* Q(ms)= 9.635
* Q(es)= 0.524
* Q(ts)= 0.497
* V(as)= 98.150 liters (3.466 cubic feet)
* L(e)= 1.62 mH
* n(0)= 0.60 %
* SPL= 89.89 1W/1m
* M(ms)= 342.70 grams
* C(ms)= 0.07 mm/N
* BL= 10.50